Tuesday, January 04, 2011

Hundreds of LED's - text

(This was meant to be posted with the previous picture)

One hundred exactly left to do. Lots of help from Claire, Ron, Linda.

Made slightly more difficult by the fact that about 50 have resistors soldered on the leg of the LED right next to the head under plastic covering. Another good number had three or four wires soldered onto the LED which needed to be reduced to two.

However, the general process is: cut from chain, strip ends, test for cathode/anode and mark, twist wire, twist onto grid of tinned copper wires, solder. Very time consuming.


Post a Comment

<< Home

Newer›  ‹Older